Valspar All-in-One Wood Prep

Description

Cleans, brightens and removes stains from wood surfaces so you can stain or waterproof them for better, longer-lasting results.

• Prepares the surface by restoring wood’s natural color and beauty
• Eliminates tannin stains, rust stains and mill glaze
• Brightens and removes stains

Coverage
150 ft/gal – 250 ft/gal

HOW TO USE

Usage
Decks, fences, outdoor furniture and other exterior wood surfaces.

Prep

Application
1. Add contents of container to a plastic bucket or plastic pump up sprayer. Do not use a metal container. Do not thin. 2. For ease of application, apply Valspar All-In One Wood Prep with a pump-up sprayer, or use a synthetic bristle brush or roller. 3. Apply to no more than 5-10 boards (20 sq. ft) at a time to maintain adequate surface wetness and to allow best results. Immediately and thoroughly rinse any overspray or accidental spills with water. 4. Allow Valspar All-In-One Wood Prep to remain on wood for 10-15 minutes. For best results, lightly scrub surface with a stiff, synthetic bristle brush. Do not let Valspar All-In-One Wood Prep completely dry during application. 5. Thoroughly rinse the surface with a garden hose or pressure washer, removing all residue. After rinsing the surface, be sure to saturate the ground around plants and shrubs with fresh water. 6. Stubborn stains or missed areas may need to be scrubbed with additional Valspar All-In-One Wood Prep and rinsed again.

Dry Time
To The Touch: 10 minute – 15 minute

Clean-up & Disposal
Rinse equipment and brushes thoroughly with soap and water.