Description
Hobart Handler 210 MVP with SpoolRunner 100 MIG Welding Package 951787
The Hobart Handler 210 MVP MIG Welder with SpoolRunner 100 spool gun is a complete 210 amp MIG welding package. This portable system has the output to handle 3/8 in. thick mild steel and enough control for 24 gauge material. The MVP (Multi-Voltage Plug) feature allows the Handler 210 MVP to operate on either 115 Volt or 230 Volt input power. Seven output voltage settings and infinite wire feed speed control make the unit easy to set and adjust for different materials, thicknesses and wires.
INCLUDED direct plug-in SpoolRunner 100 spool gun expands the capability for aluminum welding. The SpoolRunner spool gun can also be used for mild or stainless steel MIG welding applications. It comes complete with storage case and 10 ft. leads.
The Handler 210 MVP MIG welder is recommended for running the following wires: mild or stainless steel .023-.035 in., flux cored .030-.045 in., aluminum .030-.035 in.
Processes
MIG (GMAW)
Flux Cored (FCAW) (gas and self-shielded)
Applications
Maintenance/repair
Auto body
Farm/ranch
Construction
Boat/marine
Metal art
Features
SpoolRunner 100 spool gun expands aluminum MIG welding capabilities and plugs directly into the Handler 210 MVP, no additional adapters or control boxes needed! Just remove the standard MIG gun and replace it with the SpoolRunner 100 spool gun, flip the switch on the center panel from “MIG Gun” to “Spool Gun” and you’re ready to go.
Max 210 amps in small, portable case – Sized for transport of the unit to the job site and the power to weld 3/8 in. mild steel.
7 voltage selections – Permit easier fine control of the output parameters for improved arc, less spatter, better bead appearance, excellent penetration and minimal post-weld cleanup.
Proven built-in wire feeder with quick-release tension lever – Provides positive feed with adjustable tension. Easy access for threading wire.
Replaceable, built-in contactor – Eases use and excellent safety feature. Makes the welding wire electrically “cold” when not pulling the trigger.
Convenient polarity changeover with tip holder – Access makes it quick and easy to change polarity when switching from solid wire to flux cored wire. Includes convenient storage holes for spare tips.
Quick-change, dual groove drive rolls – Easy to change from one wire diameter to another .023/.025 in. or .030-.035 in.
Short circuit protection – Protects the unit against current overload.
Self-resetting thermal overload – Protects power transformer to ensure reliability.
Solid-state motor protection – Protects wire feed system from overload.
5/3/1 Industrial Warranty AND Technical Assistance – Five-year warranty on transformer and stabilizer; three years on electronics (drive motors, PC boards) and one year on MIG gun. Worldwide service network and 1-800-332-3281 Tech Help Line for prompt service and assistance.
Hobart Exclusive! Multi-voltage plug (MVP) allows you to connect to common 115 or 230 V power receptacles without the use of any tools – simply choose the plug that fits the receptacle and connect it to the power cord.
Specs
SpoolRunner 100 Spool Gun Specs
Comes complete with:
Hobart Handler 210 MVP MIG welding power source
SpoolRunner 100 spool gun with 10 ft. leads
Durable built-in wire feeder
MVP plug for 115 volt or 230 volt input power
Integrated spool gun control circuitry with selector switch for MIG gun or spool gun operation
built-in gas solenoid valve
Dual-gauge regulator and gas hose
10 ft. HR-100 MIG gun
10 ft. work lead with clamp
Spare .030 in. contact tips
Sample spool of .030 in. self-shielding flux cored welding wire
Weld set-up and information chart
Owner’s manual with parts lists, installation, operation, maintenance and MIG welding guidelines
Reviews
There are no reviews yet.