Miller XMT 650 Multiprocess Welder 460V 907843

Description

Miller XMT 650 Multiprocess Welder 460V 907843

The Miller XMT 650 is a 650 amp multi-process welder that operates on 3-Phase, 460 volt input power. It can perform MIG, TIG, Stick and submerged arc welding. It is also capable of carbon arc gouging with 3/8 inch diameter carbons.

The XMT 650 is specifically designed for heavy duty welding in the structural steel, building construction and ship building industries. It has a corrosion-resistant aluminum case and is very electrically efficient. The XMT 650 has excellent stick and Lift-Arc TIG arc characteristics. It also features superior short-arc MIG characteristics for precise thin metal welding performance

Processes

• MIG (GMAW)
• Stick (SMAW)
• DC TIG (GTAW)
• Flux Cored (FCAW)
• Air Carbon Arc (CAC-A) Cutting and Gouging (through 3/8 in carbons)
• Submerged Arc Welding (SAW)

  Applications
  Heavy Industrial Applications
  Fabrication and construction
  Heavy manufacturing
  MRO maintenance/repair
  Pressure tank/vessel fabrication
  Shipbuilding
  Refineries and foundries
  Rail car manufacturing
  Earth-moving equipment manufacturing

  Features

• Auto Remote Sense
  Enables unit to automatically use remote control if connected to remote control receptacle.
• 14-pin receptacle
  Has the flexibility to be used with spool guns, feeders, and remote controls.
• Arc control
  Is active in the stick and solid-wire processes.
  It allows the operator to customize arc characteristics to match preference, electrode and joint design from a softer arc with more fluid puddle to a stiffer arc with a more controllable puddle.
  The Star setting is optimized for most applications and pointing the control at Soft or Stiff is optimal for most arc preferences.
  Control is fully adjustable from 0 to 25 Soft or 0 to 25 Stiff.
• LED process indicator
  Front panel process selections are illuminated with an LED that identifies the active process.
  This enables the selected weld process to be seen at a distance from the power source.
• Gouging mode is an optimized stick position for better gouging performance
• Three wire modes (GMAW/FCAW/SAW) for simplified setup and optimized arc performance
  – Solid and flux-cored wires with gas
  – Flux-cored (self-shielded)
  – Sub arc
• Stick mode for all electrode types
• Lift-Arc TIG
• Back panel
  15 amps of 120-volt power to run power tools