Diamond Ground Piranha III Tungsten Grinder DGP-PG3-A

Description

Diamond Ground Piranha III Tungsten Grinder DGP-PG3-A

Genuine Diamond Ground Piranha III tungsten grinder features a universal collet that accepts .040 through 3/16 diameter tungsten welding electrode. It also has enhanced safety provided by a sliding dust shield for 100% dust containment. The Piranha III’s on/off switch with LED light gives clear visual indication that the unit is turned on. The chassis weighs only 38 lbs. and features a recessed handle, integrated receptacle for holding tungsten electrodes, and blue powder coat finish.

Why use a dedicated tungsten grinder

• Safety: Enclosed grinding area captures Tungsten dust for easy disposal.
• Weld Quality: 20 Ra surface finish improves Tungsten life, arc starting, arc stability and produces consistent weld penetration.
• Productivity: Longitudinally diamond grind your Tungsten electrode in less than 30 seconds correctly and consistently.
• Value: The PIRANHA III diamond grinds, flats and notches your Tungsten economically.

  For .040″ through 3/16″ diameter tungsten electrode.

  Features

• Sliding dust shield for 100% dust containment
• Easy set-up, optimal consistency and near-perfect repeatability.
• Compact, durable and solid design with no vibration.
• Longitudinal 20 RA grinding for maximum arc starting, arc stability, electrode life & weld penetration.
• Universal collet arm for 6 electrode sizes – 040″ (1.0mm), 1/16″ (1.6mm), 3/32″ (2.4mm),1/8″ (3.2mm) ,5/32″ (4.0mm) & 3/16″ (4.8mm) – with no equipment changes.
• Included angle scale for angles from 10 degrees – 60 degrees
• Precision tip flat gauge & depth adjustment stop ensures exact tungsten points every time – enabling consistent, repeatable arc performance and welding output.
• Containment baffle to keep dust inside the grinder housing, for safety and easy disposal.
• Tip flat block for square end grinding and removing bad tips.
• Electrode notching station for simple cut-off.
• Integrated receptacle area for ease of handling electrodes
• Recessed handle for better form & function
• On/off switch with LED light for improved display of unit operation
• Lightened chassis for reduced weight
• Signature blue powdercoat
• Vacuum-port ready
• Detailed manual for valuable engineering data and welding recommendations.

  Specs

• Range of Included Angle: 10 degrees – 60 degrees
• Electrode Diameters: 040″(1.0mm),1/16″ (1.6mm), 3/32″ (2.4mm),1/8″ (3.2mm) , 5/32″ (4.0mm) & 3/16″ (4.8mm)
• Minimum Electrode Length: 1.75″ ( 44.5mm)
• Voltage: 100/120 VAC, 50/60Hz
• Power Consumption: 500 Watts
• Motor: 1/10 hp, 3000rpm, 2.5 amps
• Length: 13.5″ (342mm)
• Width: 7.0″ (177mm)
• Height: 9.5″ (240mm)
• Weight: 46 lbs (20.87kg)