Western Check Valves (set) – Torch To Hose Size B WE60

Description

Western Check Valves (set) – Torch To Hose Size B WE60

NOTE: For use with “B” Hose fittings only.

Western WE60 Torch to Hose Check Valves mount easily on torch, are readily seen and can be removed for periodic testing. Stops reverse flow at point of origin.

For torch to hose applications, Western Check Valves guard against danger caused by plugged tips, over-pressurizing or incorrect startup procedures. Proper Check Valve installation helps prevent accidents caused by gases mixing in hoses, regulators or cylinders.

Note: Check valves do not stop flashbacks.

Features

• Western’s reverse flow Check Valves meet or exceed CGA and OSHA requirements (Pamphlet CGA-E2)
• Flows for cutting up to 12″ of steel
• Machined high quality brass with stainless steel operating spring and valve disc
• Low open/close pressures: 3 oz. open valve and 10 oz. reverse pressure to positively close valve
• 100% tested and UL Listed
• Made in U.S.A.
• Pressure ratings: Oxygen – To 125 PSIG (860 kPa)
  Fuel Gas – To 50 PSIG (345 kPa)
• Check Valve Seat Material: Viton