Description
Miller Multimatic 235 Multiprocess Welder 907780 (240V Power)
The Miller Multimatic 235 is a 235 amp, portable multi-process welder that is capable of MIG, Flux-cored, DC stick, DC Lift-Arc TIG and Pulsed TIG welding. It is the first-ever Miller welder that functions with any OPTIONAL Miller Spoolmatic or Spoolmate spool gun. For Spoolmate 200 and all Spoolmatic models, Auto-Gun Detect automatically detects which gun (MIG or Spool) is being used and allows you to switch between MIG gun and spool gun by simply pulling the trigger. Spoolmate 100 and Spoolmate 150 spool guns can also be used with the Multimatic 235, but the Auto-Gun Detect feature will not work with these spool gun models. Both the Spoolmate 100 and 150 need to be plugged into the 235’s MIG gun receptacle in order to function properly.
The Multimatic 235 comes complete with a full color 4.3 inch LCD screen with Auto-Set Elite technology. Auto-Set Elite sets MIG, Stick and DC TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. The 235 also features a built-in program for stainless steel MIG welding that uses Argon 98%/CO2 2% as the shielding gas. This will save hundreds of dollars per cylinder over using helium mix shielding gases for your stainless steel MIG applications.
The Miller Multimatic 235 Multiprocess Welder 907780 runs on 240V single-phase input power. It comes complete with MDX-250 MIG gun, electrode holder, clamp, flow gauge regulator and gas hose, reversible drive rolls, extra contact tips and material thickness gauge. The TIG welding kit is sold separately.
Processes
MIG (GMAW)
Flux Cored (FCAW)
DC Stick (SMAW)
DC Lift-Arc TIG (GTAW)
Pulsed TIG (GTAW-P)
Features
Available for MIG, stick and DC TIG processes with the ability to fine-tune your settings.
Set weld parameters by selecting:
MIG – wire and gas type, wire diameter and material thickness
Stick – electrode type, electrode diameter and material thickness
DC Lift-Arc TIG (shown) – remote on/off, tungsten diameter and material thickness
DC Pulse – adjustable from Off-150 pulses per second (PPS)
TIG Post-Flow – adjustable from Auto-25 seconds (accessible through service menu screen 13)
DC Lift-Arc
Tungsten size selection
Dual-locked, front-loading liner optimizes wire feedability
Install AccuLock contact tips with a single turn
AccuLock liner locks at front and back of gun to align with contact tip and power pin, resulting in a flawless wire feed path
Durable, ergonomic handle with overmolding improves grip and comfort
Ball-and-socket handle with rear swivel for increased gun maneuverability and decreased welder fatigue
Specs
This is a DC only machine. It cannot TIG weld Aluminum
Comes complete with
Reviews
There are no reviews yet.