Miller Spoolmate 3035 MIG Spoolgun 195016

Description

Miller Spoolmate 3035 MIG Spoolgun 195016

The Miller Spoolmate 3035 MIG Spoolgun is highly reliable and economical and features excellent feeding characteristics for welding aluminum. The spool canister holds one pound spools of aluminum MIG welding wire up to .035 in diameter.

Process

• MIG welding (GMAW) with Aluminum and other soft alloy wires

  Applications
  Light-duty Aluminum Fabrication

  Features

• Lightweight industrial spool gun rated at 150 amps at 60% duty cycle.
• New! Cable sheath and spring strain relief.
• 20 ft weld/control cables provide reach and accessibility to your work.
• Lightweight and well-balanced to improve operator comfort.
• Spool canister protects the wire and allows you to easily see the spool.
• Easy to remove barrel assembly.

  NOTE: When ordering this item for use with a Millermatic 185, Hobart IronMan 210 or IronMan 250, please order required diverter switch in accessories below.

  Comes complete with
  

• Six FREE 1 lb. spools of Hobart 4043 .035 diameter aluminum MIG welding wire.

Get six FREE 1 lb. spools of Hobart MaxalMig 4043 .035 diameter aluminum MIG welding wire with the purchase of this Spoolmate 3035 spool gun. While supplies last. (No substitutions allowed.)

Hobart ER4043 .035 Aluminum MIG Welding Wire – 1# Spool 404303504

1 lb. Spool – Genuine Hobart ER4043 .035 diameter Aluminum MIG Welding Wire is a general purpose wire that is well-suited for welding 6XXX series aluminum. It is classified as AWS A5.10 ER4043 and is an all-position solid MIG wire with a low melting temperature and excellent corrosion resistance.

Applications
Welding 6xxx alloys
Automotive/motorcycle frames
Sports products – scooters/bicycles
General repair and maintenance

Features

• Moderate strength (28 ksi typical)
• Low melting temperature/high fluidity
• Low welding smut and discoloration
• Low ductility, formability, and lower toughness
• Moderate electrical conductivity and thermal conductivity
• Excellent corrosion resistance
• Low shrinkage rate/reduced distortion
• Low hot cracking sensitivity in most applications

  Shielding Gas:
  Argon 100%
  Argon/Helium mixes for 1 inch + thick plate