Miller Venture 150 T Power Source ONLY w/TIG Kit 951000258

Description

Miller Venture 150 T Power Source ONLY with TIG Kit 951000258

The Miller Venture 150 T Power Source ONLY with TIG Contractor Kit is capable of up to 160 amps of DC TIG welding output, when paired with an OPTIONAL Miller 400Wh battery pack #301756. It also produces up to 150 amps of DC stick output. TIG welding features include High Frequency and Lift-Arc TIG welding arc starts, pulsed-TIG, integrated gas valve, adjustable preflow/postflow and flow-through Dinse connection. The included RMS-6M remote control connects through the 6-pin remote receptacle on the machine’s front panel. Stick welding features include Miller’s Hot Start, which provides better arc starts and helps prevent your electrode from sticking to the workpiece. The Venture also handles E6010 stick electrodes with ease.

The Venture 150 T weighs only 27 pounds, with battery attached – making it the lightest battery welder in its class. It comes complete with 10 ft. lead cable with electrode holder, 10 ft. ground with clamp, TIG torch kit with gas flowgauge regulator and hose, shoulder strap and Miller’s True Blue 3 year warranty.Miller’s True Blue 3 year warranty.

Process

High Frequency & Lift-Arc DC TIG (GTAW)

Pulsed DC TIG (GTAW-P)

Stick (SMAW)

Applications
Mechanical contractors
Maintenance and repair
Construction
Mobile welding

Features

High-frequency TIG arc starts
For non-contact arc initiation that reduces tungsten and material contamination.

Lift-Arc
Provides TIG arc starting that minimizes contamination of the tungsten electrode without the use of high-frequency.

QuietPulse
DC pulse welding waveshape is changed to create a slower, more fluid transition between the background and peak amperage, resulting in lower audible noise.

Built-in gas solenoid
Eliminates the need for a bulky 2-piece torch with a gas valve.

6010 stick electrode capability
Superior stick arc performance even on the difficult-to-run electrodes like E6010.

Hot Start
Adaptive control provides positive arc starts without sticking.

Fan-On-Demand
Power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminants pulled through the machine.

Thermal overload protection
Helps prevent machine damage in light industrial applications.

Low OCV Stick
A simple design that reduces the open-circuit voltage to 12-16 volts when the welding power source is not in use. Can be enabled or disabled. Some jobs require this.

Stick-Stuck
detects if the electrode is stuck to the work piece and turns the welding output off to safely and easily remove the electrode.

NOTE: This is a DC welder ONLY. It CANNOT weld aluminum.

Comes complete with

Venture 150 T Power Source ONLY

12.5 ft. (3.8 m) Weldcraft A-150 TIG torch with 50mm flow-through Dinse-style connector

RMS-6M On/Off hand control #195269

Flow gauge regulator with 12 ft. (3.7 m) gas hose

AK2C TIG torch accessory kit

10 ft. (3 m) #4 work cable with clamp and 50 mm Dinse-style connector

10 ft. (3 m) #4 lead cable with stick electrode holder and 50 mm Dinse-style connector

Shoulder strap with pad

4 Rubber bumpers/feet