Description
Stainless steel probe body. Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simplypunch a hole in your kettle walland attach using the included stainless steel nut and silicone washer. 2″long probe (measured from the back part of the threads to the probe tip). Detachable connector with a spring lock.Cablesold separately. Includeswater-resistant/splash-proof silicone temperature probe cap.
Our temperature probes use 3-wire RTD (resistive thermal device) Pt100 sensors instead of 2-wire K-type thermocouples (TC) as they offer greater accuracy over the brewing temperature range. RTDs also remain more accurate over time (less drift which means less re-calibration). To use, connect to a device that supports 3-wire RTD temperature probes such as our Electric Brewery Control Panels. Cable sold separately.
What size hole is needed for the M14x1.5 probe?
A 9/16″ hole is required. We recommend using ahole punch.See ourBoil Kettle instructions (STEP 2: Add a temperature probe)for more information.
Are temperature probe tips interchangeable?
Yes. Any ofourtemperature probe tips can be used with any of our temperature probe cables.
Specifications
Sensor:RTD (resistive thermal device) Pt100
Max sensor temperature:248 F (120C)
Accuracy:Class A (+/- 0.15C at 0C) perInternational Electrotechnical Commission (IEC)60751
Alpha coefficient:0.003850
Reviews
There are no reviews yet.