Description
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock.Cablesold separately. Includes water-resistant/splash-proof silicone temperature probe cap.
Our temperature probes use 3-wire RTD (resistive thermal device) Pt100 sensors instead of 2-wire K-type thermocouples (TC) as they offer greater accuracy over the brewing temperature range. RTDs also remain more accurate over time (less drift which means less re-calibration). To use, connect to a device that supports 3-wire RTD temperature probes such as our Electric Brewery Control Panels. Cable sold separately.
Note that with Tri-Clamp fittings the size refers to the outside diameter of the tubing that it makes a connection for, not the flange diameter (the flat disc part).
For 2″ Tri-clamp fittings the diameter of the outer flange is 2.52″(64mm). 1.5″ Tri-Clamp probes can be used in 2″Tri-Clamp fittings (or vice versa)with a suitable adapter/reducer (not included).
Are temperature probe tips interchangeable?
Yes. Any ofourtemperature probe tips can be used with any of our temperature probe cables.
Specifications
Sensor:RTD (resistive thermal device) Pt100
Max sensor temperature:248 F (120C)
Accuracy:Class A (+/- 0.15C at 0C) perInternational Electrotechnical Commission (IEC)60751
Alpha coefficient:0.003850
Reviews
There are no reviews yet.